Specifications
1 - 8 0 0 - 6 3 3 - 0 4 0 5
e11-52
Operator Interface
Volume 14
C-more 6” Micro-Graphic Specifications
NOTE: The environmental specifications for the panels shown above are also applicable for the C-more 6” Micro-Graphic accessories
shown later in this section of the catalog.
Specifications
EA1-S6ML EA1-S6MLW EA1-T6CL
Physical
• Dimensions
6.850” (W) x 5.331” (H) x 2.130” (D) [174.0 mm x 135.4 mm x 54.1 mm] (Landscape Mode)
5
.331” (W) x 6.850” (H) x 2.130” (D) [135.4 mm x 174.0 mm x 54.1 mm] (Portrait Mode)
• Enclosure Mounting
Thickness Range
0
.04” – 0.2” [1 – 5 mm]
• Mounting Clip Screw
Torque Range
2
1 – 28 oz-in [0.15 – 0.2 Nm]
• Depth from bezel rear
with options Module
1.894” [47.1 mm]
• Weight
30.69 oz. (870 g)
Environmental
• Operating Temperature
0
to 50 °C (32 to 122 °F) Maximum surrounding air temperature rating: 50 °C
• Storage Temperature
–20 to +60 °C (–4 to +140 °F)
• Humidity
5–95% RH (non-condensing)
• Environmental Air
For use in Pollution Degree 2 environment
• Vibration
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Enclosure
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
• Agency Approvals
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382, CSA 234884
C-more 6” Micro-Graphic panel specifications continued on next page.