Specifications

Chapter 2 Installation 27
DISPLAY COMPUTER SETTINGS To achieve best performance and reliability in your WATCHOUT system, you
need to adjust several settings on all your display computers. Most of the
settings below are found by clicking the Start button and choosing Control
Panel.
Network Open the “Network and Sharing Center” control panel and configure TCP/IP
as described on preceding pages. Specify a unique IP number for each display
computer by changing the last group of IP address digits.
As an example: in a system consisting of one production computer and three
display computers, you would end up with IP addresses assigned like this:
If your WATCHOUT subnet is not stand-alone but connected to a larger
network, you should consult your network administrator for the correct IP
number, subnet mask, and other parameters.
▲ IMPORTANT: Each display computer must be manually assigned a unique
IP address. Unlike the production computer, the display computers may not
use automatic (dynamic) IP number assignment.
Display
computer
s
192.168.0.1
Production
computer
192.168.0.10
192.168.0.11
192.168.0.12