Specifications

Appendix D Production Computer Protocol 253
LIST OF COMMANDS The table below shows the available commands, with some commands
explained in more detail on the following pages.
Command Parameters Description
run [<string>] Run timeline from current position, optional aux timeline name.
halt [<string>] Stop at the current position, with optional auxiliary timeline name
kill <string> Stop and deactivate the named auxiliary timeline.
gotoTime <uint>/<string> [<string>] Go to a time position, specified in milliseconds or as a time. The
second, optional, parameter selects an auxiliary timeline.
gotoControlCue <string> [<bool> [<string>]] Go to a named Control cue (name is case sensitive).
standBy <bool> Set the standby mode to true or false.
load <string> [<uint> [<bool>]] Load a show from specified file, with optional parameters.
online <bool> Control the online status of the production software.
update Update the display computers.
enableLayerCond <uint> Set enabled layer conditions (see table on page 255).
setInput <string> <float> [<uint>] Set the value of a named Input, with optional fade-rate in mS.