Data Sheet

C-MAX Beacon BC08
Datasheet
SPEC No.
C-MAX Beacon
BC08 DataSheet
Revision
1.3
State
2019-12-17
Printed
2020-03-26
Version
English
Page
3 of 8
C-MAX
2.1 Operational Flow
2.2 Initial Activation
Upon first use or after new ID is programmed into the beacon device, the beacon will be in
standby activation mode. A Supervisor mobile APP has to be used to activate the beacon into
normal active broadcast mode. Upon launching the APP, selecting USER mode, input the
serial number of the beacon to be activated and then a simple click on “Activate” will activate
the beacon which should be placed next to the Apple mobile device.
If after battery is replaced, the device will remain in receive mode for 1 minute waiting for new
ID to be programmed, if no new ID is programmed, the device will go into normal beacon
mode, without the need for activation.
APP configurable device settings
Power On
(battery inserted)
Receive Mode
(for ID programming)
Broadcast Mode
(Normal Beacon Mode)
Programmed new ID
via APP
Test Broadcast Mode
(for ID verification)
Sleep Mode
(wait for activation)
User Activation
via mobile APP
within 1
min
after 1
min
after 1 min
timeout