C-MAX C-MAX Beacon BC08 Datasheet Beacon Broadcast Device CMP-9304BC08 SPEC No. Revision State Printed Version Page C-MAX Beacon BC08 DataSheet 1.
C-MAX Beacon BC08 Datasheet 1 C-MAX Description The CMP-9304BC08 is a Bluetooth Low-Energy proximity beacon suitable for mass deployment by system integrators. The device advertises ID data that is compatible with common beacon standards (UUID, Major ID, and Minor ID). An supervisor mobile APP is also available for over-the-air beacon settings to configure parameters such as UUID, Major ID, Minor ID, advertising intervals and measured power at 1 meter. 1.
C-MAX Beacon BC08 Datasheet 2.1 C-MAX Operational Flow Power On (battery inserted) Receive Mode (for ID programming) within 1 min Programmed new ID via APP after 1 min timeout Broadcast Mode (Normal Beacon Mode) Test Broadcast Mode (for ID verification) after 1 min User Activation via mobile APP 2.2 Sleep Mode (wait for activation) Initial Activation Upon first use or after new ID is programmed into the beacon device, the beacon will be in standby activation mode.
C-MAX Beacon BC08 Datasheet 2.3 C-MAX iBeacon Broadcast The normal Beacon Advertisement packet will be broadcasted every 1 second or at an interval set by the user between 100 milliseconds and 10 seconds. The broadcasting packet is according to the following standard Apple iBeacon format: The packet consists of : UUID (16 bytes or 32 hexadecimal characters). By default it is set to C-MAX’s UUID: E2C56DB5-DFFB-48D2-B060-D0F5A71096E0. Major ID (2 bytes or 4 hexadecimal characters).
C-MAX Beacon BC08 Datasheet 2.4 C-MAX Battery Level Broadcast An additional supplement advertisement packet will be broadcasted every 5 mins by default or at an interval specified by the user within the range of 1 seconds and 3600 seconds. This allows the mobile APP to check for the battery voltage and alert for battery low conditions. 2.
C-MAX Beacon BC08 Datasheet C-MAX (1 sec broadcast interval) Beacon Interval Average Current (Before Activation) Average Current (After Activation) 1 5 sec uA 14 uA Range 30 m Operating Temperature 4. -10 +60 broadcast interval = 1 sec, Output power = +0.
C-MAX Beacon BC08 Datasheet 5.2 C-MAX FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 5.3 Important Note The device is limited to OEM installation ONLY 1.
C-MAX Beacon BC08 Datasheet C-MAX This device is pending for compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Disclaimer of Warranty Information furnished is believed to be accurate and reliable. However C-MAX assumes no responsibility, neither for the consequences of use of such information nor for any infringement of patents or other rights of third parties, which may result from its use.
