Operating instructions

K6
Fig. 16
Post Commissioning
l Ensure system pressure has been set correctly.
l Set DHW temperature adjustment knob to required position
l Set heating flow temperature adjustment knob to required
temperature.
l Set the built in clock or external programmer to
householder’s requirements.
l Set external controls.
l Switch boiler to domestic hot water position and draw off hot
water to allow TSS@ cylinder to heat up quickly.
Handing Over to the Householder
l Demonstrate the lighting and operation of the boiler.
l Demonstrate how to maintain the system pressure.
l Demonstrate the operation and settin
8
of the built-in clock.
l Explain that the reheating of the TSS cylinder may bring
the boiler on unexpectedly except in heating only position.
l Explain the need for annual servicing and that it must be
carried out by a competent person.
l Fill out and register guarantee.
l Leave users instructions, installation manual and all other
documentation with the householder.