Installation & Assembly

2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly tuck the wiring into the junction box, place the fixture base onto the mounting plate, and secure it in place using fixture
screws.
Place the shade over the socket and secure it in place by screwing the collar nut onto the socket. Repeat for remaining shades.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
1
2
3
1A
4
5
6
Install the Fixture
7
FIXTURE SCREW
MOUNTING
PLATE
4
3
JUNCTION BOX
5
COLLAR NUT
LAMP
SHADE
SOCKET
5
6
7