Datasheet

Intended use:

Hotmelt Adhesive.

5. Composition/information on ingredients:

EVA-copolymer / Synthetic resin / Wax and Stabilizer

The product does not contain any substances presenting a health hazard within

the meaning of the Danish and EC regulations.

6. Hazards identification:

Gases formed at high temperatures may irritate the eyes and the respiratory

tract.

As a liquid, the material may cause serious burns.

4. First aid measures:

General:

In all cases of doubt, seek medical attention.

Inhalation:

In case of exposure to gases formed at high temperatures remove affected

person from area. Fresh air and rest. Seek medical advice if discomfort persists.

Eye contact:

Remove contact lenses. After separating the eyelids flush with copious amounts

of water, at least 10 min. seek medical advice.

Skin contact (Burns):

Rinse with cold water until the pain stops. If medical advice is necessary, rinse

until doctor takes over treatment.

Ingestion:

Do not induce vomiting. If vomiting occurs, hold head low so stomach content

does not enter the lungs. Seek immediate medical advice.

11. Fire fighting measures:

Extinguishing media: Foam, CO2, dry chemical, water spray

Fire will produce dense black smoke containing products of combustion.

Decomposition products may be a hazard to health. Appropriate self-containing

breathing apparatus may be required.

Hazardous Combustion Products : carbon dioxide, carbon monoxide

12. Accidental release measures:

See protective measures listed in section 8.

In case of spills allow to cool and sweep up. Hold waste for disposal according to

local regulations (see section 13).

13. Handling and storage:

Handling: