Installation manual

11
SYSTEM 236 Installation Manual
CL 0A and 0B
Command Location 0A: Communications Format
1111
(1) (2) (3) (4)
Default Values
0A
Digit Position (1): Receiver #1 Receiver Format
1 = Fast "A", 2300 Hz
2 = Slow "B", 1400 Hz
3 = SumCheck, 1400 Hz
4 = SumCheck, 2300 Hz
5 = CFSK III
6 = Ademco DTMF, 1400 Hz
Digit Position (2): Receiver #1 Message Format
1 = 3/1 Extended
2 = 4/2 (2-digit reporting code)
3 = CFSK III
Digit Position (3): Receiver #2 Receiver Format
1 = Fast "A", 2300 Hz
2 = Slow "B", 1400 Hz
3 = SumCheck, 1400 Hz
4 = SumCheck, 2300 Hz
5 = CFSK III
6 = Ademco DTMF, 1400 Hz
Digit Position (4): Receiver #2 Message Format
1 = 3/1 Extended
2 = 4/2 (2-digit reporting code)
3 = CFSK III
Valid combinations of Receiver Format and Message Format are listed below.
Message Format Receiver Format
3/1 Extended All formats, except CFSK III and DTMF, 1400 Hz
4/2 (2-digit reporting) All formats, except CFSK III
CFSK III CFSK III only
#
Command Location 0B: Account Number
0B
000000
(1) (2) (3) (4) (5) (6)
Default Values
#
Digit Positions (1) - (6): Account Number
Valid entries are 0 - F.
The account number is right justified. The last digit must be in Position (6).
The SYSTEM 236 will read the account number using:
Digit Positions (4) - (6) in 3-digit accounts
Digit Positions (3) - (6) in 4-digit accounts
Digit Positions (1) - (6) in 6-digit accounts
Fill all unused Digit Positions with 0's.
PROGRAMMING CONVERSIONS
Hexadecimal Value
Key Strokes
A
B
C
D
E
F
0
1
2
3
4
5
NOTE: Some Alpha keypads may have a [SHIFT] key
and an [ENTER] key in place of the [*] and [#]
keys, respectively. This manual uses the [*] for the
[SHIFT] key and the [#] for the [ENTER] key.