Operating instructions

slow flash slow flash slow flash System is in programming mode.

fast flash Call for service.

on steady Call for service.

slow flash on steady Call for service.

slow flash slow flash Ready and bypassed zone flash at the

same rate.

slow flash slow flash Service and zone in trouble.

Flash at the same rate.

slow flash slow flash slow flash Armed with

4 7 #

*Flashing zones are bypassed.

COMMUNICATIONS

FAILURE

WATCHDOG RESET

BELL FUSE FAILURE

LOW BATTERY

ZONE BYPASSED

ZONE(S) IS OR

WAS IN ALARM

ZONE TROUBLE

PERIMETER ARMED

WITH DELAY ZONES

CONVERTED TO INSTANT

POWER

LIGHT

READY

LIGHT

ARMED

LIGHT

REMARKS

SERVICE

LIGHT

ZONES

LIGHTS

PROGRAMMING

MODE

slow flash on* fast flash An alarm has occurred on this zone.

*Armed light is on if the system is armed.

slow flash Panel has reset itself. System OK. To reset the

Service Light, press * 1 #.