Installation manual

9
SOUNDER DURATION 3-2 (Range 3-20 minutes)
Enter 3-2. The factory default is 15 minutes. You can program a new time by
entering one key from the following table.
Enter 1 3 minutes. LED 1 on.
Enter 2 4 minutes. LED 2 on.
Enter 3 5 minutes. LED 3 on.
Enter 4 10 minutes. LED 4 on.
Enter 5 15 minutes. LED 5 on. (default)
Enter 6 20 minutes. LED 6 on.
Press * to confirm the selection. The accept tone then sounds.
NIGHT SET/HOME SET EXIT TIME 3-3 (Range 0-90 seconds)
Enter 3-3. The factory default is 15 seconds. You can program a new time
by entering one key from the following table.
Enter 0 0 Seconds. All LEDs off (Instant).
Enter 1 10 Seconds. LED 1 on.
Enter 2 15 Seconds. LED 2 on. (default)
Enter 3 30 Seconds. LED 3 on.
Enter 4 45 Seconds. LED 4 on.
Enter 5 60 Seconds. LED 5 on.
Enter 6 90 Seconds. LED 6 on.
Press * to confirm the selection. The accept tone then sounds.
Note: If extension speakers are fitted in Night and Home set, you can alter
the exit sounder volume by the control on the PCB marked
VOLUME.
Option Option Results from choosing option no.
Code Description 0 1 2 3 4 5 6
3-0 Exit Time (secs) 10 15 30 45 60 90
3-1 Entry Time (secs) 10 15 30 45 60 90
3-2 Sounder Duration (mins) 3 4 5 10 15 20
3-3 Night / Home Exit (secs) 0 101530456090
After you enter the user code, the sounder starts at the lower controlled
volume. The volume increases after 5 seconds if Night or Home set are not
selected.
Examples
Change the full set Exit Time to 60 seconds
ENTER THIS 3-0 5 *
Description Choose Full Set Select 60 seconds Confirm selection
Change the Sounder Duration to 3 minutes
ENTER THIS 3-2 1 *
Description Choose Sounder Select 3 minutes Confirm selection
Change the Entry Time to 45 seconds
ENTER THIS 3-1 4 *
Description Choose Entry Select 45 seconds Confirm selection
SUMMARY
NIGHT/HOME
SET EXIT
TIMER
SOUNDER
DURATION