User`s manual

3-3. Ethernet Module Installation
1 Ethernet Cable 1.8M
2 Bracket
3 Ethernet module
4 Module Connection Wire
5 Bracket Screw*2
6 Secure Screw*1
【 Note 】
Please make sure that anti-static precautions
are adopted during the installation.
123
5
64
1. Make sure the power is off and the
power cable is unplugged. Place the
printer onto a smooth surface and flip the
whole printer unit upside down.
2. Unscrew the screws as indicated in figure.
3. Press the Cover Open Button and open
the top cover.
1
1
2
2
4. Remove the middle compartment and the
top cover.
5. Remove the Ethernet port cover from
back plate of the printer.
6. Secure the Ethernet module onto the
bracket.
EZ-1000Plus User’s Manual
23