Use and Care Manual
2
E
Flat Head Hex Bolt - M6*15mm
2
F
Flat Head Hex Bolt - M6*35mm
6
M6*15
M6*35
M6
M6
G
8
Flat Washer - M6
H
Plastic Bolt Head Cover - M6
8
M6
I
1
Hex Wrench - M6
Step 3
Step 4
Step 1
Step 2
B
G
F
A
C
G
E
G
F
D
ASSEMBLY INSTRUCTIONS
CUSTOMER SUPPORT
Please reach out to our support team before leaving any negative review or feedback on Amazon.
Your complete satisfaction matters to us, so if our product hasn’t met or exceeded your expectations, or if
you are having problems with assembly, missing or damaged parts, before you do anything else please
email our support team directly, let us know the full details of the issue (attaching clear pictures to your
email will always help us to better understand exactly what's gone wrong).
We promise to respond to your email within 24 hours, and we guarantee that we will fix the problem to
your complete satisfaction.
service@c-hopetree.com
Take the chair seat (D) and and fix between the
arms using the 35mm M6 bolts (F) and flat washers
(G). Finger tighten only at this stage.
Take the right and left arms (A & B) and align the
holes under each arm in the rear leg with the upper
holes in the chair back (C). Fix using the 35mm M6
bolts (F) and M6 flat washers (G). Finger tighten
only at this stage.
Use the 15mm M6 bolts (E) and M6 flat washers
(G) to attach the remaining lower chair back tabs to
the matching holes in the right and left arms.
Finger tighten only at this stage.
Place the twin seat right way up on a level surface
and firmly hand tighten all the bolts using the hex
wrench (I). Cover the bolt heads with the plastic bolt
head covers (H) if desired.
FWTS-2420-2v2022