Use and Care Manual

FWTS-2420-2v2022

WHAT’S IN THE BOX

Item

Part

Qty

Part Description

Right Arm

Left Arm

Chair Back

Chair Seat

IMPORTANT INFORMATION

•

Never use power tools to assemble this product.

•

Clean only with a soft damp cloth, do not use abrasive cleaning products.

• Maximum safe load 530lb (240kg).

• This product contains small parts and sharp points, keep away from children and pets until assembly is

complete.

• Do not stand on the product under any circumstances.

• When using this product basic common-sense safety precautions should be followed to reduce the risk of

personal injury and/or damage to the product.

SAFETY WARNING

PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE

Woven Twin Seat

BEFORE YOU START

•

Check you have all the listed parts before you start assembling.

•

Assembly will be made easier if two people work together.

In the event of missing or damaged parts, contact our customer support team at

service@c-hopetree.com

Assemble on a flat surface using a drop sheet or rug to avoid scratching.

PAGE 1
Woven Twin Seat PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE SAFETY WARNING • This product contains small parts and sharp points, keep away from children and pets until assembly is complete. • Do not stand on the product under any circumstances. • When using this product basic common-sense safety precautions should be followed to reduce the risk of personal injury and/or damage to the product. IMPORTANT INFORMATION • Never use power tools to assemble this product.
PAGE 2
E M6*15 F M6*35 G M6 H M6 I M6 2 Flat Head Hex Bolt - M6*15mm 6 Flat Head Hex Bolt - M6*35mm 8 Flat Washer - M6 8 Plastic Bolt Head Cover - M6 1 Hex Wrench - M6 ASSEMBLY INSTRUCTIONS Step 1 Take the right and left arms (A & B) and align the holes under each arm in the rear leg with the upper holes in the chair back (C). Fix using the 35mm M6 bolts (F) and M6 flat washers (G). Finger tighten only at this stage.