6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions Technical ● Application ● Assembly ● Availability ● Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
VSKCS400/045 Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Schottky Rectifier, 400 A FEATURES • 150 °C TJ operation • Low forward voltage drop • High frequency operation • Low thermal resistance • UL approved file E78996 • Compliant to RoHS Directive 2002/95/EC • Designed and qualified for industrial level ADD-A-PAK BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRODUCT SUMMARY IF(AV) • High surge capability 400 A • Easy mountin
VSKCS400/045 Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Schottky Rectifier, 400 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per module per leg IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TC = 91 °C, rectangular waveform 5 μs sine or 3 μs rect.
VSKCS400/045 ADD-A-PAK Generation VII Vishay Semiconductors Power Modules Schottky Rectifier, 400 A 10000 Reverse Current - IR (mA) 100 150°C 1000 125°C 100°C 100 75°C 10 50°C 25°C 1 0.1 0 10 20 30 40 50 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Tj = 150°C 10000 10 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 1000 Tj = 125°C Tj = 25°C TJ= 25°C 1 0.0 0.3 0.6 0.9 1.2 1000 1.
VSKCS400/045 ADD-A-PAK Generation VII Power Modules Schottky Rectifier, 400 A Vishay Semiconductors 250 Square wave (D=0.50) 80% rated Vr applied 140 Average Power Loss- (Watts) Allowable Case Temperature (°C) 160 120 100 DC 80 60 40 20 see note (1) 180° 120° 90° 60° 30° 200 150 DC RMS Limit 100 50 0 0 0 100 200 300 400 0 500 50 100 150 200 250 300 Average Forward Current - IF(AV)(A) Average Forward Current - IF(AV) (A) Fig. 5 - Maximum Allowable Case Temperature vs.
VSKCS400/045 ADD-A-PAK Generation VII Vishay Semiconductors Power Modules Schottky Rectifier, 400 A ORDERING INFORMATION TABLE Device code VS KC S 40 0 1 2 3 4 5 / 1 - Vishay Semiconductors product 2 - Circuit configuration: 045 6 KC = ADD-A-PAK - 2 diodes/common cathode 3 - S = Schottky diode 4 - Average rating (x 10) 5 - Product silicon identification 6 - Voltage rating (045 = 45 V) CIRCUIT CONFIGURATION (1) + (2) - (3) - LINKS TO RELATED DOCUMENTS Dimensions Documen
Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 24 ± 0.5 (1 ± 0.020) 6.7 ± 0.3 (0.26 ± 0.012) Viti M5 x 0.8 Screws M5 x 0.8 Document Number: 95369 Revision: 11-Nov-08 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.
VISHAY SEMICONDUCTORS Modules Application Note Mounting Instructions for ADD-A-PAK Generation VII Generation VII ADD-A-PAK (AAP) power modules combine the excellent thermal performance enabled by a direct bonded copper (Al2O3) substrate, superior mechanical ruggedness, and an environmentally friendly manufacturing process that eliminates the use of hard molds, thus reducing direct stresses on the leads. To prevent axial pull-out, the electrical terminals are co-molded to the module housing.
Application Note Vishay Semiconductors Mounting Instructions for ADD-A-PAK Generation VII Next, make a uniform coating on the heatsink mounting surfaces and module substrate with a good quality thermal compound. Screen printing of the compound is recommended, as well as direct application through a roller or spatula. The datasheet values for thermal resistance assume a uniform layer of thermal compound with a maximum thickness of 0.08 mm. The thermal conductivity of the compound should be no less than 0.
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
