6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
VSK.41.., VSK.56..
VSK.41.., VSK.56..
VSK.41.., VSK.56.. Series ADD-A-PAK Generation VII Power Modules Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A TRIGGERING PARAMETER SYMBOL VSK.56 PGM 10 2.5 IGM 2.5 Maximum peak gate current Maximum peak negative gate voltage VSK.41 PG(AV) Maximum peak gate power Maximum average gate power TEST CONDITIONS - VGM VGT W A 10 TJ = - 40 °C Maximum gate voltage required to trigger UNITS 4.0 Anode supply = 6 V resistive load TJ = 25 °C V 2.5 TJ = 125 °C 1.
VSK.41.., VSK.56.. Series Maximum average on-state power loss (W) 130 VSK.41 Series RthJC (DC) = 0.44°C/W 120 110 100 180° 120° 90° 60° 30° 90 80 0 Maximum allowable case temperature (°C) ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A 10 20 30 40 80 180° 120° 90° 60° 30° 60 RMS limit 100 20 VSK.41 Series Per leg, Tj = 125°C 0 10 20 30 40 50 60 70 80 Average on-state current (A) Average on-state current (A) Fig.
VSK.41.., VSK.56.. Series ADD-A-PAK Generation VII Power Modules Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A Maximum total on-state power loss (W) 160 140 RthSA = 0.1 °C/W 0.3 °C/W 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 2 °C/W 3 °C/W 5 °C/W 180° 120° 90° 60° 30° 120 100 80 60 40 VSK.41 Series Per module Tj = 125°C 20 0 0 20 40 60 80 100 0 Total RMS output current (A) 20 40 60 80 100 120 140 Maximum allowable ambient temperature (°C) Fig.
VSK.41.., VSK.56.. Series Maximum average on-state power loss (W) 130 VSK.56 Series RthJC (DC) = 0.35°C/W 120 110 100 180° 120° 90° 60° 30° 90 80 0 Maximum allowable case temperature (°C) ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A 10 20 30 40 50 60 180° 120° 90° 60° 30° 120 100 DC 80 RMS limit 60 40 20 VSK.56 Series Per leg, Tj = 125°C 0 0 20 60 80 100 Average on-state current (A) Fig. 10 - Current Ratings Characteristics Fig.
VSK.41.., VSK.56.. Series ADD-A-PAK Generation VII Power Modules Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A Maximum total on-state power loss (W) 250 RthSA = 0.1 °C/W 0.2 °C/W 0.3 °C/W 0.4 °C/W 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 2 °C/W 4 °C/W 180° 120° 90° 60° 30° 200 150 100 50 VSK.56 Series Per module Tj = 125°C 0 0 20 40 60 80 100 120 140 0 Total RMS output current (A) 20 40 60 80 100 120 140 Maximum allowable ambient temperature (°C) Fig.
VSK.41.., VSK.56.. Series ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A Vishay High Power Products 1000 VSK. 41 Series Per leg VSK. 56 Series Per leg Instantaneous on-state current (A) Instantaneous on-state current (A) 1000 100 10 Tj = 125°C Tj = 25°C 100 10 Tj = 125°C Tj = 25°C 1 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Instantaneous on-state voltage (V) Instantaneous on-state voltage (V) Fig. 19 - On-State Voltage Drop Characteristics Fig.
VSK.41.., VSK.56.. Series ADD-A-PAK Generation VII Power Modules Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A ORDERING INFORMATION TABLE Device code VSK T 56 1 2 3 / 16 4 1 - Module type 2 - Circuit configuration (see end of datasheet) 3 - Current code 4 - Voltage code (see Voltage Ratings table) 41 = 45 A 56 = 60 A Note • To order the optional hardware go to www.vishay.
Outline Dimensions Vishay High Power Products ADD-A-PAK Generation VII - Thyristor DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 30 ± 1 (1.18 ± 0.039) 15.5 ± 0.5 (0.6 ± 0.020) 24 ± 0.5 (1 ± 0.020) Viti M5 x 0.8 Screws M5 x 0.8 6.7 ± 0.3 (0.26 ± 0.012) Fast-on tab 2.8 x 0.8 (0.110 x 0.03) Document Number: 95368 Revision: 11-Nov-08 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) 5.8 ± 0.25 (0.228 ± 0.010) 15 ± 0.
V I S H AY H I G H POW E R P R O D U C T S Modules Application Note Mounting Instructions for ADD-A-PAK Generation VII Generation VII ADD-A-PAK (AAP) power modules combine the excellent thermal performance enabled by a direct bonded copper (Al2O3) substrate, superior mechanical ruggedness, and an environmentally friendly manufacturing process that eliminates the use of hard molds, thus reducing direct stresses on the leads.
Application Note Vishay High Power Products Mounting Instructions for ADD-A-PAK Generation VII Next, make a uniform coating on the heatsink mounting surfaces and module substrate with a good quality thermal compound. Screen printing of the compound is recommended, as well as direct application through a roller or spatula. The datasheet values for thermal resistance assume a uniform layer of thermal compound with a maximum thickness of 0.08 mm.
