Owner's manual
VS-100MT060WDF
www.vishay.com
Vishay Semiconductors
Revision: 01-Mar-12
3
Document Number: 93412
For technical questions, contact: indmodules@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the
compound.
SWITCHING CHARACTERISTICS (T
J
= 25 °C unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
PFC IGBT
Total gate charge Q
g
I
C
= 60 A
V
CC
= 480 V
V
GE
= 15 V
- 460 -
nCGate to source charge Q
gs
- 160 -
Gate to drain (Miller) charge Q
gd
-70-
Turn-on switching loss E
on
I
C
= 100 A, V
CC
= 360 V, V
GE
= 15 V
R
g
= 5 , L = 500 μH, T
J
= 25 °C
-0.2-
mJTurn-off switching loss E
off
-0.96-
Total switching loss E
tot
-1.16-
Turn-on delay time t
d(on)
- 240 -
ns
Rise time t
r
-47-
Turn-off delay time t
d(off)
- 240 -
Fall time t
f
-66-
Turn-on switching loss E
on
I
C
= 100 A, V
CC
= 360 V, V
GE
= 15 V
R
g
= 5 , L = 500 μH, T
J
= 125 °C
-0.33-
mJTurn-off switching loss E
off
-1.45-
Total switching loss E
tot
-1.78-
Turn-on delay time t
d(on)
- 246 -
ns
Rise time t
r
-50-
Turn-off delay time t
d(off)
- 246 -
Fall time t
f
-71-
Input capacitance C
ies
V
GE
= 0 V
V
CC
= 30 V
f = 1 MHz
- 9500 -
pFOutput capacitance C
oes
- 780 -
Reverse transfer capacitance C
res
- 120 -
THERMISTOR ELECTRICAL CHARACTERISTICS (T
J
= 25 °C unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Resistance R T
J
= 25 °C - 30 000 -
B value B T
J
= 25 °C/T
J
= 85 °C - 4000 - K
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL MIN. TYP. MAX. UNITS
AP FRED Pt Diode Junction to case diode thermal resistance
R
thJC
--4.9
°C/W
IGBT Junction to case IGBT thermal resistance - - 0.27
FRED Pt
Chopper Diode
Junction to case diode thermal resistance - - 2.25
Case to sink, flat, greased surface per module R
thCS
-0.06-°C/W
Mounting torque ± 10 % to heatsink
(1)
--4Nm
Approximate weight - 65 - g