6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
ST230CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 410 A FEATURES • Center amplifying gate • Metal case with ceramic insulator • International standard case TO-200AB (A-PUK) RoHS COMPLIANT • Lead (Pb)-free TO-200AB (A-PUK) • Designed and qualified for industrial level TYPICAL APPLICATIONS • DC motor controls PRODUCT SUMMARY IT(AV) 410 A • Controlled DC power supplies • AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IT(AV) Ths I
ST230CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 410 A ON-STATE CONDUCTION PARAMETER SYMBOL Maximum average on-state current at heatsink temperature IT(AV) Maximum RMS on-state current IT(RMS) Maximum peak, one-cycle non-repetitive surge current ITSM TEST CONDITIONS 180° conduction, half sine wave double side (single side) cooled I2√t 55 (85) °C t = 10 ms 5700 t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms t = 8.
ST230CPbF Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 410 A TRIGGERING PARAMETER SYMBOL Maximum peak gate power PGM Maximum average gate power PG(AV) Maximum peak positive gate current IGM Maximum peak positive gate voltage + VGM Maximum peak negative gate voltage - VGM VALUES TEST CONDITIONS TYP. TJ = TJ maximum, tp ≤ 5 ms 10.0 TJ = TJ maximum, f = 50 Hz, d% = 50 2.0 TJ = TJ maximum, tp ≤ 5 ms 3.
ST230CPbF Series Maximum Allowable Heatsink Temperature (°C) 130 ST230C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.17 K/W 120 110 100 90 Conduction Angle 80 30° 70 60° 90° 60 120° 180° 50 40 0 40 80 120 160 200 240 280 320 Average On-state Current (A) Maximum Allowable Heatsink Temperature (°C) Phase Control Thyristors (Hockey PUK Version), 410 A Vishay High Power Products 130 ST230C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.
ST230CPbF Series 5500 5000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125°C 4500 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 410 A 4000 3500 3000 2500 ST230C..C Series 2000 1 10 100 6500 6000 5500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained.
ST230CPbF Series Phase Control Thyristors (Hockey PUK Version), 410 A Vishay High Power Products 10 (1) PGM = 10W, (2) PGM = 20W, (3) PGM = 40W, (4) PGM = 60W, Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 µs b) Recommended load line for <=30% rated di/dt : 10V, 10ohms tr<=1 µs tp = 4ms tp = 2ms tp = 1ms tp = 0.66ms (a) (b) VGD IGD Tj=-40 °C 1 0.1 0.
Outline Dimensions Vishay High Power Products TO-200AB (A-PUK) DIMENSIONS in millimeters (inches) Case Style TO-200AB (A-PUK) Anode to gate Creepage distance: 7.62 (0.30) minimum Strike distance: 7.12 (0.28) minimum 19 (0.75) DIA. MAX. 0.3 (0.01) MIN. 13.7/14.4 (0.54/0.57) 0.3 (0.01) MIN. Gate terminal for 1.47 (0.06) DIA. pin receptacle 19 (0.75) DIA. MAX. 38 (1.50) DIA MAX. 2 holes 3.56 (0.14) x 1.83 (0.07) minimum deep 6.5 (0.26) 4.75 (0.19) 25° ± 5° 42 (1.65) MAX. 28 (1.
