6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
ST1200C..
ST1200C..KP Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 1650 A ON-STATE CONDUCTION PARAMETER SYMBOL Maximum average on-state current at heatsink temperature IT(AV) Maximum RMS on-state current IT(RMS) TEST CONDITIONS 180° conduction, half sine wave double side (single side) cooled DC at 25 °C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.
ST1200C..KP Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 1650 A TRIGGERING PARAMETER SYMBOL Maximum peak gate power PGM Maximum average gate power PG(AV) Maximum peak positive gate current IGM Maximum peak positive gate voltage + VGM Maximum peak negative gate voltage - VGM VALUES TEST CONDITIONS TYP.
ST1200C..KP Series ST1200C..K Series (Single Side Cooled) RthJ-hs (DC) = 0.042 K/W 120 110 100 90 Conduction Angle 80 30° 60° 70 90° 60 120° 180° 50 40 0 200 400 600 800 1000 1200 Maximum Allowable Heatsink Temperature (°C) 130 Phase Control Thyristors (Hockey PUK Version), 1650 A 130 ST1200C..K Series (Double Side Cooled) R thJ-hs (DC) = 0.021 K/W 120 110 100 90 Conduction Period 80 70 60 50 30° 60° 90° 40 30 20 120° 180° 0 3600 Fig. 1 - Current Ratings Characteristics Fig.
ST1200C..KP Series 28000 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 1650 A At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 26000 24000 22000 20000 18000 16000 14000 12000 ST1200C..K Series 1 10 100 32000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration.
ST1200C..KP Series Vishay High Power Products 10 Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 µs b) Recommended load line for <=30% rated di/dt : 10V, 10ohms tr<=1 µs (1) PGM = 10W, tp = 4ms (2) PGM = 20W, tp = 2ms (3) PGM = 40W, tp = 1ms (a) (b) Tj=-40 °C VGD Tj=25 °C 1 Tj=125 °C Instantaneous Gate Voltage (V) 100 Phase Control Thyristors (Hockey PUK Version), 1650 A (1) (2) (3) IGD Device: ST1200C..K Series 0.1 0.001 0.01 0.
Outline Dimensions Vishay High Power Products A-24 (K-PUK) DIMENSIONS in millimeters (inches) Case Style A-24 (K-PUK) Creepage distance: 28.88 (1.137) minimum Strike distance: 17.99 (0.708) minimum 1 (0.04) MIN. 2 places 47.5 (1.87) DIA. MAX. 2 places Pin receptable AMP. 60598-1 27.5 (1.08) MAX. 67 (2.6) DIA. MAX. 20° ± 5° 74.5 (2.9) DIA. MAX. 4.75 (0.2) NOM. 44 (1.73) 2 holes DIA. 3.5 (0.14) x 2.1 (0.
