6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
SD3000C..
SD3000C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 3800 A FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at heatsink temperature TEST CONDITIONS 180° conduction, half sine wave Double side (single side) cooled IF(AV) Maximum RMS forward current 25 °C heatsink temperature double side cooled IF(RMS) t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current t = 8.3 ms IFSM t = 10 ms t = 8.
SD3000C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 3800 A SD 3 0 0 0 C ..K Se rie s (Sin g le S id e C o o le d ) R thJ-hs (D C ) = 0 .0 4 2 K / W 160 140 120 C o nd uctio n A ng le 100 80 30 ° 6 0° 90° 60 120° 180 ° 40 0 50 0 1 00 0 1 5 00 2 0 00 2 50 0 180 M a x im u m A llo w a b le H e a t sin k T e m p e ra t u re ( °C ) M a x im um A llo w a b le H e a t sink T e m p e ra tu re (°C ) 180 S D 3 0 0 0 C ..
SD3000C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 3800 A 40000 At Any Rated Load Con dition An d W ith Rated V R RM Applied Following Surge. In itial TJ = 180 °C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 30000 25000 P e a k H a lf S in e W a v e F o rw a r d C ur re n t (A ) Peak Half Sine W ave Forw ard Current (A) 35000 20000 15000 10000 SD3000C ..
SD3000C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 3800 A ORDERING INFORMATION TABLE Device code SD 300 0 C 10 K 1 2 3 4 5 6 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic PUK 5 - Voltage code x 100 = VRRM (see Voltage Ratings table) 6 - K = PUK case DO-200AC (K-PUK) LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93543 Revision: 14-May-08 http://www.vishay.
Outline Dimensions Vishay Semiconductors DO-200AC (K-PUK) DIMENSIONS in millimeters (inches) 74.5 (2.93) DIA. MAX. 3.5 (0.14) DIA. NOM. x 1.8 (0.07) deep MIN. both ends 47.5 (1.87) DIA. MAX. 2 places 27.5 (1.08) MAX. 1 (0.04) MIN. both ends 67 (2.64) DIA. MAX. Quote between upper and lower pole pieces has to be considered after application of mounting force (see Thermal and Mechanical Specifications) Document Number: 95247 Revision: 26-Nov-07 For technical questions, contact: indmodules@vishay.
Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.
