User Manual

PS21997-4, PS21997-4A
Intellimod™ Module
Dual In-line Intelligent Power Module
30 Amperes/600 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697-1800 [phone]
4 10/09
Thermal Characteristics
Characteristic Symbol Condition Min. Typ. Max. Units
Junction to Case R
th(j-c)
Q Inverter IGBT (Per 1/6 Module) — — 2.1 °C/Watt
Junction to Case R
th(j-c)
D Inverter FWDi (Per 1/6 Module) — — 3.0 °C/Watt
Recommended Conditions for Use
Characteristic Symbol Condition Min. Typ. Value Units
Supply Voltage V
CC
Applied between P-N Terminals 0 300 400 Volts
Control Supply Voltage V
D
Applied between V
P1
-V
NC
, V
N1
-V
NC
13.5 15.0 16.5 Volts
V
DB
Applied between V
UFB
-U, 13.0 15.0 18.5 Volts
V
VFB
-V, V
WFB
-W
Control Supply Variation dV
D
, dV
DB
-1 — 1 V/µs
Arm Shoot-through Blocking Time t
DEAD
For Each Input Signal, T
C
≤ 100°C 2.0 — — µs
PWM Input Frequency f
PWM
T
C
≤ 100°C, T
j
≤ 125°C — — 20 kHz
Allowable Minimum Input P
WIN(on)
** 200V ≤ V
CC
≤ 350V, 0.5 — — µs
Pulse Width P
WIN(off)
*** 13.5V ≤ V
D
≤ 16.5V, Below Rated Current 1.5 — — µs
13.0V ≤ V
DB
≤ 18.5V Between Rated Current 3.0 — — µs
-20°C ≤ T
C
≤ 100°C, and 1.7 Times
N-line Wiring Inductance Rated Current
Less than 10nH
V
NC
Voltage Variation V
NC
Between V
NC
-N (Including Surge) -5.0 — 5.0 Volts
*The allowable rms current value depends on the actual application conditions.
**Input signal with ON pulse width less than P
WIN(on)
may not respond.
***Input signal with OFF pulse width less than PWIN(off) may make no resonse or may have a delayed response to P-side input only. The delay is less than 4µs.