User Manual

PM300CLA120
Intellimod™ L-Series
Three Phase IGBT Inverter
300 Amperes/1200 Volts
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
4 Rev. 12/05
Thermal Characteristics
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Junction to Case Thermal Resistance R
th(j-c)Q
IGBT (Per 1/6 Module) (Note 1) — — 0.08 °C/Watt
R
th(j-c)D
FWDi (Per 1/6 Module) (Note 1) — — 0.13 °C/Watt
Contact Thermal Resistance R
th(c-f)
Case to Fin Per Module, — — 0.014 °C/Watt
Thermal Grease Applied
Note 1: If you use this value, R
th(f-a)
should be measured just under the chips.
Recommended Conditions for Use
Characteristic Symbol Condition Value Units
Supply Voltage V
CC
Applied across P-N Terminals ≤800 Volts
Control Supply Voltage* V
D
Applied between V
UP1
-V
UPC
, V
VP1
-V
VPC
, 15.0 ± 1.5 Volts
V
WP1
-V
WPC
, V
UN1
-V
UNC
, V
VN1
-V
VNC
, V
WN1
-V
WNC
Input ON Voltage V
CIN(on)
Applied between U
P
-V
UPC
, U
N
-V
UNC
, ≤0.8 Volts
Input OFF Voltage V
CIN(off)
V
N
-V
VNC
, V
P
-V
VPC
, W
N
-V
WNC
, W
P
-V
WPC
≥9.0 Volts
PWM Input Frequency f
PWM
— ≤20 kHz
Arm Shoot-through Blocking Time t
DEAD
Input Signal ≥3.0 µs
*With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak.