User guide

320
CM150TF-12H
Six-IGBT IGBTMOD™ H-Series Module
150 Amperes/600 Volts
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
Absolute Maximum Ratings, T
j
= 25 °C unless otherwise specified
Ratings Symbol CM150TF-12H Units
Junction Temperature T
j
–40 to 150 °C
Storage Temperature T
stg
–40 to 125 °C
Collector-Emitter Voltage (G-E SHORT) V
CES
600 Volts
Gate-Emitter Voltage V
GES
±20 Volts
Collector Current I
C
150 Amperes
Peak Collector Current I
CM
300* Amperes
Diode Forward Current I
F
150 Amperes
Diode Forward Surge Current I
FM
200* Amperes
Power Dissipation P
d
600 Watts
Max. Mounting Torque M5 Terminal Screws – 17 in-lb
Max. Mounting Torque M5 Mounting Screws – 17 in-lb
Module Weight (Typical) – 830 Grams
V Isolation V
RMS
2500 Volts
* Pulse width and repetition rate should be such that device junction temperature does not exceed the device rating.
Static Electrical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Collector-Cutoff Current I
CES
V
CE
= V
CES
, V
GE
= 0V – – 1.0 mA
Gate Leakage Current I
GES
V
GE
= V
GES
, V
CE
= 0V – – 0.5 µ A
Gate-Emitter Threshold Voltage V
GE(th)
I
C
= 15mA, V
CE
= 10V 4.5 6.0 7.5 Volts
Collector-Emitter Saturation Voltage V
CE(sat)
I
C
= 150A, V
GE
= 15V – 2.1 2.8** Volts
I
C
= 150A, V
GE
= 15V, T
j
= 150°C – 2.15 – Volts
Total Gate Charge Q
G
V
CC
= 300V, I
C
= 150A, V
GS
= 15V – 450 – nC
Diode Forward Voltage V
FM
I
E
= 150A, V
GE
= 0V – – 2.8 Volts
** Pulse width and repetition rate should be such that device junction temperature rise is negligible.
Dynamic Electrical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Input Capacitance C
ies
–– 15nF
Output Capacitance C
oes
V
GE
= 0V, V
CE
= 10V, 1MHz – – 5.3 nF
Reverse Transfer Capacitance C
res
– – 3 nF
Resistive Turn-on Delay Time t
d(on)
– – 200 ns
Load Rise Time t
r
V
CC
= 300V, I
C
= 150A, – – 550 ns
Switching Turn-off Delay Time t
d(off)
V
GE1
= V
GE2
= 15V, R
G
= 4.2Ω – – 300 ns
Times Fall Time t
f
– – 300 ns
Diode Reverse Recovery Time t
rr
I
E
= 150A, di
E
/dt = –300A/ µ s––110ns
Diode Reverse Recovery Charge Q
rr
I
E
= 150A, di
E
/dt = –300A/ µ s – 0.41 – µ C
Thermal and Mechanical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Thermal Resistance, Junction to Case R
th(j-c)
Per IGBT – – 0.21 °C/W
Thermal Resistance, Junction to Case R
th(j-c)
Per FWDi – – 0.47 °C/W
Contact Thermal Resistance R
th(c-f)
Per Module, Thermal Grease Applied – – 0.025 °C/W