User guide

2
CM100DY-28H
Dual IGBTMOD™ H-Series Module
100 Amperes/1400 Volts
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
Absolute Maximum Ratings, T
j
= 25 °C unless otherwise specified
Ratings Symbol CM100DY-28H Units
Junction Temperature T
j
–40 to 150 °C
Storage Temperature T
stg
–40 to 125 °C
Collector-Emitter Voltage (G-E SHORT) V
CES
1400 Volts
Gate-Emitter Voltage (C-E SHORT) V
GES
±20 Volts
Collector Current I
C
100 Amperes
Peak Collector Current I
CM
200** Amperes
Emitter Current I
E
* 100 Amperes
Emitter Current-Pulse I
EM
* 200** Amperes
Maximum Collector Dissipation P
c
780*** Watts
Max. Mounting Torque M5 Terminal Screws – 17 in-lb
Max. Mounting Torque M6 Mounting Screws – 26 in-lb
Module Weight (Typical) – 270 Grams
V Isolation V
RMS
2500 Volts
* I
E
, V
EC
, T
rr
, Q
rr
& di
E
/dt represent characteristics of the anti-parallel, emitter to collector free-wheel diode (FWDi).
** Pulse width and repetition rate should be such that the device junction temp. (T
j
) does not exceed T
j(max)
rating.
*** Junction temperature (T
j
) should not increase beyond 150°C.
Static Electrical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Collector-Cutoff Current I
CES
V
CE
= V
CES
, V
GE
= 0V – – 1.0 mA
Gate Leakage Current I
GES
V
GE
= V
GES
, V
CE
= 0V – – 0.5 µ A
Gate-Emitter Threshold Voltage V
GE(th)
I
C
= 10mA, V
CE
= 10V 5.0 6.5 8.0 Volts
Collector-Emitter Saturation Voltage V
CE(sat)
I
C
= 100A, V
GE
= 15V – 3.1 4.2* Volts
I
C
= 100A, V
GE
= 15V, T
j
= 125°C – 2.95 – Volts
Total Gate Charge Q
G
V
CC
= 800V, I
C
= 100A, V
GE
= 15V – 510 – nC
* Pulse width and repetition rate should be such that device junction temperature rise is negligible.
Dynamic Electrical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Input Capacitance C
ies
– – 20 nF
Output Capacitance C
oes
V
GE
= 0V, V
CE
= 10V – – 7 nF
Reverse Transfer Capacitance C
res
– – 4 nF
Resistive Turn-on Delay Time t
d(on)
– – 250 ns
Load Rise Time t
r
V
CC
= 800V, I
C
= 100A, – – 400 ns
Switching Turn-off Delay Time t
d(off)
V
GE1
= V
GE2
= 15V, R
G
= 3.1Ω – – 300 ns
Times Fall Time t
f
– – 500 ns
Diode Reverse Recovery Time t
rr
I
E
= 100A, di
E
/dt = –300A/ µ s – – 300 ns
Emitter-Collector Voltage V
EC
I
E
= 100A, V
GE
= 0V – – 3.8 V
Diode Reverse Recovery Charge Q
rr
I
E
= 100A, di
E
/dt = –300A/ µ s – 1.0 – µ C
Thermal and Mechanical Characteristics, T
j
= 25 °C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Thermal Resistance, Junction to Case R
th(j-c)
Per IGBT – – 0.16 °C/W
Thermal Resistance, Junction to Case R
th(j-c)
Per FWDi – – 0.35 °C/W
Contact Thermal Resistance R
th(c-f)
Per Module, Thermal Grease Applied – – 0.13 °C/W