Instruction Manual

Document Number: 94342 For technical questions, contact: [e-mail]
www.vishay.com
Revision: 06-Jun-08 1
Input Rectifier Diode, 25 A
25ETS..SPbF High Voltage Series
Vishay High Power Products
DESCRIPTION/FEATURES
The 25ETS..SPbF rectifier High Voltage Series
has been optimized for very low forward
voltage drop, with moderate leakage. The glass
passivation technology used has reliable
operation up to 150 °C junction temperature.
Typical applications are in input rectification and these
products are designed to be used with Vishay HPP switches
and output rectifiers which are available in identical package
outlines.
This product has been designed and qualified for industrial
level and lead (Pb)-free.
PRODUCT SUMMARY
V
F
at 10 A 1 V
I
FSM
300 A
V
RRM
800/1200 V
3
Anode
1
Anode
Base
cathode
2
D
2
PAK
Available
RoHS*
COMPLIANT
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS
Capacitive input filter T
A
= 55 °C, T
J
= 125 °C
common heatsink of 1 °C/W
20 23 A
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
Sinusoidal waveform 25 A
V
RRM
800/1200 V
I
FSM
300 A
V
F
10 A, T
J
= 25 °C 1.0 V
T
J
- 40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
V
RRM
, MAXIMUM
PEAK REVERSE VOLTAGE
V
V
RSM
, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
25ETS08SPbF 800 900
1
25ETS12SPbF 1200 1300
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
F(AV)
T
C
= 106 °C, 180 ° conduction half sine wave 25
A
Maximum peak one cycle
non-repetitive surge current
I
FSM
10 ms sine pulse, rated V
RRM
applied 250
10 ms sine pulse, no voltage reapplied 300
Maximum I
2
t for fusing I
2
t
10 ms sine pulse, rated V
RRM
applied 316
A
2
s
10 ms sine pulse, no voltage reapplied 442
Maximum I
2
√t for fusing I
2
√t t = 0.1 to 10 ms, no voltage reapplied 4420 A
2
√s
* Pb containing terminations are not RoHS compliant, exemptions may apply