6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature FEATURES • Polarized aluminum electrolytic capacitors, solid electrolyte MnO2 • Radial leads, max. height 10 mm, resin dipped, orange colored • Extremely long useful life, 20 000 hours/125 °C • Extended high temperature range up to 175 °C • Excellent low temperature, impedance and ESR behaviour • Charge and discharge proof, application with 0 Ω Fig.1 Component outlines resistance allowed • Reverse DC voltage up to 0.
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature SELECTION CHART FOR CR, UR, UC AND RELEVANT MAXIMUM CASE SIZES (H x W x T in mm) UR (V) at Tamb = 85 °C CR (µF) 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 6.3 10 16 UC (V) at Tamb = 125 °C 25 6.3 10 16 25 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 5 10 x 8 x 5 10 x 8 x 6 10 x 7 x 3.5 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 4 10 x 7 x 5 10 x 8 x 5 10 x 8 x 6 - 10 x 7 x 3.5 10 x 7 x 3.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature TAPED PRODUCTS Vishay BCcomponents ELECTRICAL DATA CR IR IL5 tan δ ESR Z rated capacitance at 100 Hz, tolerance ± 20 % max. RMS ripple current no necessary DC applied max. leakage current after 5 minutes at UR max. dissipation factor at 100 Hz max./typ. equivalent series resistance at 100 Hz max.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS Voltage Surge voltage Reverse voltage Maximum peak AC voltage Maximum peak AC voltage, without reverse voltage applied VALUE Us ≤ 1.15 x UR Urev < 0.3 x UR ≤2V Reverse voltage applied Tamb ≤ 85 °C: at f ≤ 0.1 Hz at 0.1 Hz < f ≤ 1 Hz at 1 Hz < f ≤ 10 Hz at 10 Hz < f ≤ 50 Hz at f > 50 Hz 85 °C < Tamb ≤ 125 °C: at f ≤ 0.1 Hz at 0.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature CAPACITANCE (C) C C0 Vishay BCcomponents TYPICAL CAPACITANCE CHANGE AFTER ENDURANCE TEST AT TAMB = 125 °C 1.2 4 ΔC (%) standard deviation σ 1.1 1.0 0.9 0.8 0.7 5000 h 10 000 h 0 -2 -4 -6 0.05 σ 2000 h 2 0 -8 - 10 0.6 - 80 - 40 0 40 80 120 160 0.01 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99 Tamb (°C) cumulative frequency (%) Fig.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature Vishay BCcomponents TYPICAL tan δ CHANGE AFTER ENDURANCE TEST AT Tamb = 125 °C DISSIPATION FACTOR (tan δ) 120 standard deviation σ 1.5 1.0 0.5 0.05 σ 0 tan δ (% of initial requirements) 2.0 tan δ tan δ0 init. 100 2000 h 5000 h 80 10 000 h 60 40 20 0 0 - 80 - 40 0 40 80 120 Tan δ0 = dissipation factor at Tamb = 25 °C and 100 Hz 160 0.01 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 103 103 Curve 1: 2.2 µF, 25 V Curve 1: 4.7 µF, 16 V Curve 1: 22 µF, 6.3 V ESR (Ω) 102 ESR (Ω) 102 Curve 1: 0.47 µF, 40 V Curve 2: 3.3 µF, 40 V Curve 3: 10 µF, 16 V Curve 4: 33 µF, 6.3 V 1 101 10 1 2 2 3 1 3 4 1 10-1 10-1 Case H x W x T = 10 x 7 x 4 mm 10-2 10 2 3 10 10 4 Case size H x W x T = 10 x 7 x 5 mm 10-2 10 5 10 6 f (Hz) 10 7 10 2 Fig.
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature IMPEDANCE (Z) 103 103 Curve 1: 2.2 µF, 25 V Curve 2: 4.7 µF, 16 V Curve 3: 22 µF, 6.3 V Z (Ω) 10 2 1 Z (Ω) 102 Curve 1: 0.47 µF, 40 V Curve 2: 3.3 µF, 25 V Curve 3: 10 µF, 16 V Curve 4: 33 µF, 6.3 V 2 10 1 10 1 3 1 4 2 3 1 1 10-1 10-2 10-1 Case size H x W x T = 10 x 7 x 4 mm 10 2 10 4 103 10 5 10-2 10 6 7 f (Hz) 10 10 2 Fig.
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature Vishay BCcomponents Table 3 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life PROCEDURE (quick reference) REFERENCE IEC 60384-4/ EN130300 subclause 4.13 CECC 30302 subclause 1.8.1 REQUIREMENTS Tamb = 125 °C; UR = 6.3 V to 25 V with UR applied; UR = 40 V with UC applied; 10 000 hours ΔC/C: ± 10 % Tamb = 125 °C; IR applied and: UR = 6.
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
