6121 Baker Road, Suite 108 Minnetonka, MN 55345 Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 www.chtechnology.com Thank you for downloading this document from C&H Technology, Inc. Please contact the C&H Technology team for the following questions - Technical Application Assembly Availability Pricing Phone – 1-800-274-4284 E-Mail – sales@chtechnology.com www.chtechnology.com - SPECIALISTS IN POWER ELECTRONIC COMPONENTS AND ASSEMBLIES - www.chtechnology.
54-94-104MT..
54-94-104MT..KPbF Series Vishay High Power Products Three Phase AC Switch (Power Modules), 50 A to 100 A ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 54MT..K 94/104MT..
54-94-104MT..KPbF Series Three Phase AC Switch Vishay High Power Products (Power Modules), 50 A to 100 A BLOCKING PARAMETER SYMBOL RMS isolation voltage Maximum critical rate of rise of off-state voltage VINS dV/dt (1) TEST CONDITIONS 54MT.K 94MT.K 104MT.K UNITS TJ = 25 °C all terminal shorted f = 50 Hz, t = 1 s 4000 V TJ = TJ maximum, linear to 0.67 VDRM, gate open circuit 500 V/µs Note (1) Available with dV/dt = 1000 V/µs, to complete code add S90 i. e.
4-94-104MT..KPbF Series Vishay High Power Products Three Phase AC Switch (Power Modules), 50 A to 100 A ΔR CONDUCTION PER JUNCTION SINUSOIDAL CONDUCTION AT TJ MAXIMUM DEVICES RECTANGULAR CONDUCTION AT TJ MAXIMUM UNITS 180° 120° 90° 60° 30° 180° 120° 90° 60° 30° 54MT.K 0.072 0.085 0.108 0.152 0.233 0.055 0.091 0.117 0.157 0.236 94MT.K 0.033 0.039 0.051 0.069 0.099 0.027 0.044 0.055 0.071 0.100 104MT.K 0.027 0.033 0.042 0.057 0.081 0.023 0.037 0.046 0.059 0.
54-94-104MT..KPbF Series Three Phase AC Switch Vishay High Power Products (Power Modules), 50 A to 100 A 350 300 Maximum Allowable Case Temperature (°C) 325 Peak Half Sine Wave On-State Current (A) 130 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 125 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 275 250 225 200 54MT..K Series Per junction 175 94MT..
54-94-104MT..KPbF Series Vishay High Power Products 750 130 650 Maximum Allowable Case Temperature (°C) At any rated load condition and with rated VRRM applied following surge. Initial TJ = 125 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 700 Peak Half Sine Wave On-State Current (A) Three Phase AC Switch (Power Modules), 50 A to 100 A 600 550 500 450 94MT..K Series Per junction 400 104MT..
54-94-104MT..KPbF Series Three Phase AC Switch Vishay High Power Products (Power Modules), 50 A to 100 A 1100 900 800 700 600 500 Maximum non-repetitive surge current versus pulse train duration. Control of conduction may not be maintained. Initial TJ = 125 °C No voltage reapplied Rated VRRM reapplied 1100 Peak Half Sine Wave On-State Current (A) 1000 Peak Half Sine Wave On-State Current (A) 1200 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 125 °C at 60 Hz 0.
54-94-104MT..KPbF Series Vishay High Power Products Three Phase AC Switch (Power Modules), 50 A to 100 A ORDERING INFORMATION TABLE Device code 10 4 MT 160 1 2 3 4 K PbF 5 1 - Current rating code: 5 = 50 A (average) 9 = 90 A (average) 10 = 100 A (average) 2 - AC switch 3 4 - Essential part number Voltage code x 10 = VRRM (see Voltage Ratings table) 5 - PbF = Lead (Pb)-free Note • To order the optional hardware go to www.vishay.
