User manual

3.2 IDENTIFICATION AND CONFIGURATION REGISTERS

3.2.1 I/O Registers

There are a variety of registers used to configure and control the module. These registers are

located in the IOSpace. The address map of the registers is shown in Table II. Details of the

registers are provided in Figure 4.

Table II. I/O Address Map/Command Summary

FIFO-able

(Y/N)

00h Status Register Read Only N

02h Control Register Read/Write N

04h-0Eh Reserved NA N

10h Row 0 Set Register Read/Write Y

12h Row 0 Reset Register Read/Write Y

14h Row 1 Set Register Read/Write Y

16h Row 1 Reset Register Read/Write Y

18h Row 2 Set Register Read/Write Y

1Ah Row 2 Reset Register Read/Write Y

1Ch Row 3 Set Register Read/Write Y

1Eh Row 3 Reset Register Read/Write Y

20h - 7Eh Unused NA N

80h - FEh ID EEPROM Read/Write N

C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, Texas 78681 <> www.chtech.com