User manual

Ch-23 Ch-24
Press "DRUM" button to switch the keyboard
into drum keyboard, and press "DRUM"
again and stop the function.
Use Keyboard Percussion
Function
You could assign two different tones to both
ends of the keyboard with split function, and
you can play a tone with left hand, while
your right hand plays another tone so as to
produce ensemble effect.
Use Keyboard Split Function
1 Start tone mode at first, and select an
instrument as principal tone.
2 Press "SPLIT" button to start split tone
selection mode.
3 Select an instrument as split tone with
"NUMERAL CODING" buttons.
4 Press "SPLIT" button again to cancel
keyboard split and return to normal
keyboard mode.
How to split keyboard
Setting
Setting
Using pitch wheel can obtain glissando with
turning up and down. When moving it, you
will find that its pitch adjustment is gradual-
changing pattern, and it can almost show
every tiny tune between the original pitch
and final pitch. The changing range is + - 2
semitones. When you release the pitch
wheel, the pitch will return to normal.
Using Pitch Wheel
Move the wheel for
glissando by hand
● You can use pitch wheel to imitate the
glissando effect of guitar, violin, sax, etc.
making your play more vivid.
The keyboard is touch sensitive, and
when "TOUCH" function is turned on,
the note volume will differ according to the
force that the keyboard are pressed,
Use Keyboard Touch
Sensitive Function
Press "SUSTAIN" button, and then play the
keyboard with the sound accompanied with
obvious sustaining effect, and when you
press "SUSTAIN" again, the sustain effect
function is stopped.
● sustain function takes effect only on
musical instrument with longer tone.
Control Sustain Effect
1 Press "TOUCH" button, and start touch
sensitive function.
2 Press "TOUCH" again to stop sensitive
function
● when the keyboard starts, it starts touch
sensitive function automatically.
Split keyboard
Left
keyboard
Right
keyboard
The mode memory function can record your
tone, rhythm, tempo and relevant
parameter's settings .
Mode Memory
You can choose the tone that fits current
style with the function of one touch setting,
and every rhythm has 4 preset tones.
One-touch Setting
1 Press " STORE " button, and then press
any button of "M1-M6" so as to store
current settings in corresponding position.
2 If you want to t call the saved parameter
setting when playing, you could press any
button of "M1-M4" and the saved setting
will be called to take the place of current
setting.
● After turning power off, the memory will
be automatically.
Store／call memory
parameter
1 Press " O.T.S " button to start one touch
setting mode, and then press "M1-M4"
so as to call out 4 tones preset for current
rhythm.With this mode, chord function is
turned on automatically.
2 Press " O.T.S " button again to exit the
mode .
Using One-touch setting
DRUM TOUCH
SUSTAIN
STORE