Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
Page 6 C-giant
2.3.1. Connections for yellow remote control
The yellow cable is meant to be
connected to the reverse light as default
to reverse counting when the vehicle is
reversed. However for a rallycar it is
more convenient to use it as a second
remote control (See page 25). For this
reason the remote control for the yellow
cable can not be connected in the same way as for the white remote cable. It must have
a pull up resistor of max. 10 kohm. This resistor is integrated inside the remote control
from Jemba.
2.3.2. Connections for fuel
The black cable should be connected to the standard fuel sender of your car. If you
remove the standard fuel gauge you must fit a resistor instead of it. This may be
ordered from Jemba. See page 22 for calibration.
3. SAFETY ASPECTS
Safety aspects concerning fitting of accessories inside a car must be taken in to
account when fitting C-giant. The instrument must be fitted in a way that takes into
account applicable laws and regulations and so that the risk of damages in the case of
an accident is minimised.
Yellow remote control
+12 volt
< 10 kOhm
Yellow cable