Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
Page 4 C-giant
2. FITTING C-GIANT
2.1. Fitting the instrument
Fitting the C-giant into the vehicle is extremely simple. First you have to fit the
instrument itself. Fitting of C-giant in the vehicle compartment is done with its two
fastening bolts (M4x10) at the back of the unit. The bolts may be exchanged to any
other M4 bolts providing they are the same length.
2.2. Connecting speed signal
The speed signal interface may be of different types:
- Interface for a car with electronic speedometer (PGE-.. different for different
cars)
- Wheel speed sensor, which may also be used on a propshaft or a driveshaft
- Rotating speed sensor to be connected to a mechanical speedometer or with a
universal mounting kit to cut the speedocable (DP013)
Depending on which type is required for your car the speed sensor is fitted in different
ways.