Specifications
C-giant rel 3.07. Sales by Jemba, Sweden. Tel +46 (0)586 55640
Page 28 C-giant
Example 2: Road section interval
During a road section it is convenient to have a remote control defined to perform the
following functions: Reset and show interval distance, show total distance, select and
show estimated time of arrival to next time control with 10 s resolution. Just press the
following keys.
When FUEL is selected in this example it is just in case TRIP 2 is already selected. If
it is we would select the wrong register by just continuing pressing TRIP 2.
By using the two definitions above the co-driver doesn't need to have access to the trip
meter while the car is running. Everything is done with the aid of the remote controls.
Press Result Display
OPTION Show selected remote line .WhitE
SET Starts the definition for the white remote blank display
FUEL Select FUEL as dummy before next key 1 b3
program step 1 and row
b, column 3 for FUEL
TRIP 1 Select TRIP 1 2 A2
OPTION Prefix to allow RESET to be defined 2 A2
RESET Reset TRIP 1 3 C6
TRIP 2 Select TRIP 2 4 A3
ARROW UP Copy TRIP 2 to upper left window 5 A5
ARROW UP Show TRIP 2 with 10 m resolution 6 A5
TRIP 2 Select time on stage 7 A3
TRIP 2 Select average speed on stage 8 A3
TRIP 2 Select maximum speed on stage 9 A3
TRIP 2 Select EtA-distance 10 A3
TRIP 2 Select EtA-A 11 A3
TRIP 2 Select Estimated Time of Arrival 12 A3
ARROW DOWN Copy Estimated Time of Arrival to 13 b5
lower left window
ARROW DOWN Show Estimated Time of Arrival w 10 s 14 b5
TRIP 1 Select TRIP 1 15 A2
SET Confirms the definition