Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
Page 26 C-giant
5.12. Option
C-giant has got two remote lines (yellow and white cable) that may be used with
default functions or with definitions made by the user. See page 5 and 6 on how to
connect. 'OPTION' lets you define the functions for these control lines. The indicator
in the key is on when at least one remote line is defined by the user. To clear a
definition you just select the appropriate remote line (white or yellow) with 'OPTION'
and press 'RESET'. The default functions are:
• White - reset TRIP 1 regardless of whether it is the current register or not
• Yellow - reverse the current counting direction of the trip meter.
To change the function of a remote control you just take the following actions:
If you change your mind
before the definition is
completed - just press 'RESET'
to resume to previous
definition. As the SET and
RESET keys have special functions while defining the remote they cannot be defined
as other keys. To include these keys in a definition you have to press 'OPTION' before
the SET and RESET keys.
Action C-giant shows
Press OPTION text (.OPtion
then (.WhitE)
Press OPTION Toggle between
(.WhitE) and (.YEllow)
Press SET Starts the definition
Sequence of keys to be computed Key codes
each time selected remote is activated
Press SET Confirms the definition
RESETOPTION
CAL
SPLIT
89
HALT
7
BREAK
ADD
0
PILOT
6
FUEL
5
TIME
4
TRIP1 TRIP2
12
SPEED
3
SET
by Coralba Sweden
.
.
.
-giant