Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel +46 (0)586 55640

Page 18 C-giant

5.3. Set

As mentioned previously SET is used to set any register to a desired value. The

in the display. To set the value simply press SET and you will see the figures in the

display flash. This indicates that by using the numeric keys you may enter a new

value. A negative value may be entered by preceding the value with (-). The input is

finished by pressing SET again. The value is then visible in the display.

Adjusting a value

This function will adjust the value of any register that may be set with the normal SET

procedure. Start a normal SET procedure by pressing 'SET'. Input the value to add but

in stead of confirming the input with 'SET' you confirm with the ADD key. Then the

fed value is added (including a preceding minus sign if the value is negative) to the

current register. If the register is to be decreased a minus sign (-) is fed in as a first sign

in the value. In SET mode '-' will be interpreted as a minus sign if it is the first key

after 'SET' otherwise it is interpreted as 'ADD'.

Example: Align trip to road book

You pass a junction at 34.98 km and you want to align C-giant to that value. At the

junction you press RESET and carry on without stopping. Then you press SET, 34980,

ADD/- and your input is added to the current value of the trip regardless of the

distance you have travelled in the meantime. So the trip is aligned to the road book at

the junction at 34.98 km.

5.4. Time measuring (TIME)

The clocks may be used as an ordinary clock or a stop watch. It may stop (HALT),

count up (+), down (-), freeze value (SPLIT), set or adjust value (SET) in the same

way as described for TRIP above. All the features work the same on HOUR 1 and

HOUR 2.

NOTE! if for any reason you wish to retrieve the original value

−

say if you made a

mistake simply press RESET instead of the SET-key.

NOTE! 'RESET' will reset .SS.Hour to zero if TRIP 2 is selected!