Specifications
C-giant rel 3.07. Sales by Jemba, Sweden. Tel +46 (0)586 55640
C-giant Page 17
RESETOPTION
CAL
SPLIT
89
HALT
7
BREAK
ADD
0
PILOT
6
FUEL
5
TIME
4
TRIP1 TRIP2
12
SPEED
3
SET
by Coralba Sweden
.
.
.
-giant
Also see page 16 for automatic SS measurement.
5.2. Speed measurement (SPEED)
If you want to see your current speed, simply press SPEED. The speed can be read in
km/h or MPH depending on how you have set up the unit. See page 24 for set up. The
value of the speed is frozen by SPLIT in the same way as for all other registers in the
instrument. SPEED is also used to input desired speed for the PILOT to work with.
See page 20.
5.2.1. Speed threshold (OPTION)
This option is aimed to get an indication when you exceed a pre-set speed threshold.
You may select it by pressing SPEED three times. The value may be set to a desired
value using the SET procedure. As soon as your speed exceeds that value an output
signal is activated.
Action Flash text C-giant shows Shown format
TRIP 2 .triP..2
TRIP 2 .SS.Hour
TRIP 2 .A.SPEEd
TRIP 2 .toP.SPd
TRIP 2 .EtA.diS Length of current road section xxx.xxx
TRIP 2 .EtA.-A. Estimated time of arrival for Average xx.xx.xx
speed calculated from .EtA.diS, .triP..2 and
.A.SPEEd
TRIP 2 .EtA.Cur Estimated time of arrival calculated from xx.xx.xx
.EtA.diS, .triP..2 and Current speed