Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
Page 12 C-giant
This function may be used together with TRIP l (.trip..1), TRIP 2 (.trip..2, .EtA.diS,
.EtA.-A.), SPEED (.triP..3, .SPd.thr), TIME (.Hour..1, .Hour..2), PILOT (..Pilot.),
CAL (.CAL.diS).
Selectable keys: numeric keys, -, RESET.
4.2.5. TIME
TIME has two time registers which may act as an ordinary clock or a stop watch. They
can count forwards and backwards. Flash text (.Hour..1) or (.Hour..2) and led indicator
show which function is selected. Hour 1 has a resolution of 1 second and hour 2 has a
resolution of 0.05 seconds. See page 18 for time measurement and page 22 for
calibration.
Selectable keys: ARROW UP, SET, ARROW DOWN, CAL, -, HALT, +, SPLIT,
RESET.
4.2.6. FUEL
FUEL shows amount of fuel left in the tank. See page 19. It may be calibrated to the
standard fuel gauge of your car (See page 22). Flash text (..FUEL.) and indicator show
that the function is selected.
Selectable keys: ARROW UP, ARROW DOWN, CAL, -, +, SPLIT.
4.2.7. PILOT
PILOT shows your time ahead or delayed in respect of your scheduled average speed.
Flash text (..Pilot.) and led indicator show that the function is selected. See page 20.
Selectable keys: ARROW UP, SET, ARROW DOWN, -, HALT, +, SPLIT, RESET.
4.2.8. ARROW DOWN
ARROW DOWN will copy the current register into the bottom left window. Flash text
(.SELEct). Repeated pressing will scroll the display one figure at a time to the left to
give access to the desired figures. Flash text (.ShiFt.1) and (.ShiFt.2).
4.2.9. CAL
CAL may be used when TRIP l, TRIP 2, TRIP 3 or SPEED are selected to show the
current CALIBRATING CONSTANT for distance. Flash text (.CAL.diS) and led
indicator show that the function is selected. The constant may be changed with the
SET function. See page 18. By pressing 'RESET' the C-giant enters a set up mode
where different units may be defined for distance, speed, temperature and
communication. See page 24.
Selectable keys: ARROW UP, SET, ARROW DOWN, RESET.
The CAL function can also be used when TIME is selected. Then it will calibrate the
time counting. See page 22. Flash text (.CALib.) and led indicator show that the
function is selected.
Selectable keys: SET, -, +, RESET.