Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
C-giant Page 11
RESETOPTION
CAL
SPLIT
89
HALT
7
BREAK
ADD
0
PILOT
6
FUEL
5
TIME
4
TRIP1 TRIP2
12
SPEED
3
SET
by Coralba Sweden
.
.
.
-giant
4.2.1. TRIP l, TRIP 2, TRIP 3
Registers with a resolution of l metre . Press the appropriate key to select and see
value, and to change its function. Flash text (.triP..1) and a led indicator shows that the
function is selected. TRIP 2 also has several functions including automatic SS-
measurement, (See page 16) and a function for estimating time of arrival (See page
16). TRIP 3 is selected by pressing SPEED twice. Flash Text (.triP..3).
Selectable keys: ARROW UP, SET, ARROW DOWN, CAL, -, HALT, +, SPLIT,
RESET.
By pressing TRIP 1 twice you will select a memory register. It is a general purpose
numeric register but it will be blank when 'RESET' is pressed. It is the only way to get
a blank display while driving. Flash Text (.MEMory). See page 15 for operation.
Selectable keys: ARROW UP, SET, ARROW DOWN, RESET.
4.2.2. SPEED
SPEED shows the speed of the vehicle. Flash text (.SPEEd.) and led indicator show
that the function is selected. This register is also used to input scheduled speed for the
PILOT. See page 12
Selectable keys: ARROW UP, SET, ARROW DOWN, SPLIT.
TRIP 3 is selected by pressing SPEED twice. Flash text (.triP..3) and led indicator
show that the function is selected.
Speed threshold is selected by pressing the SPEED key three times. Flash text
(.SPd.thr) and flashing led indicator show that the function is selected. The value can
be set by the normal SET procedure. See page 18.
4.2.3. ARROW UP
ARROW UP will copy the current register into the top left window. Flash text
(.SELEct). Repeated pressing will scroll the display one figure at a time to the left to
give access to the desired figures. Flash text (.ShiFt.1) and (.ShiFt.2).
4.2.4. SET
SET is used to start the input of a value to the register that is shown in the display. See
page 18.
SET may be used together with TRIP l (.trip..1), TRIP 2 (.trip..2, .EtA.diS, .EtA.-A.),
SPEED (.SPEEd., .triP..3, .SPd.thr), TIME (.Hour..1, .Hour..2), PILOT (..Pilot.), CAL
(.CAL.diS, .CALib.), OPTION (.WhitE, .YEllow).
SET is also used for adjusting a value in a register. See page 18