Product Manual

8
9. Attach the frame rails to the tongue
using two ½” x 3-1/4” bolts. Use a
washer on both sides, under the
bolt heads and under both nuts.
Assemble HAND TIGHT ONLY.
10. Lay the 2 frame cross members in between the frame rails as shown. Position them with the two
holes in the middle facing DOWN as shown in the inset. Bolt the frame rails to the cross members
using 3/8” x 1” carriage bolts and nuts. The carriage heads go to the outside. No washers are
needed here. Assemble HAND TIGHT ONLY.