Product Manual

FRAME ASSEMBLY (Group 1)

We will start by assembling the basic frame using components from group 1.

We are going to build the frame upside down, wheels up, so we will be turning all parts “bottom side

up” as we assemble the frame, then we will flip it over later to complete the assembly.

1. Layout the frame rails with 8 spring bracket holes facing up as shown.

2. Attach the spring

brackets to the

frame rail holes.

The C shaped

slipper brackets

go at the rear

and the U

shaped shackle

bolt brackets go

at the front as shown. Use 3/8” x 1” bolts and nuts. Assemble with the nuts on the inside of the

rails. Fully tighten all 8 bolts now.

3. Identify the hitch end of the tongue.

It has 2 holes for the tongue skid,

shown here. Lay the tongue on the

ground with the two skid holes

facing up. Don’t attach the skid just

yet.