Product Manual

3. Attach the brackets to the frame cross members at the

approximate best positions. Attach using U-bolts, washers

and nuts. The dimple side of the brackets engages the

open edge of the frame C channel. Attach all 4 brackets

leaving loose enough to slide on the frame.

4. Lay a carpeted bunk board on the swivel brackets with the

stapled side down to the brackets and choose how much

overhang you like off the front and back ends.

5. One bunk at the time, clamp the bunk to its swivel brackets

making sure the bracket is well centered then clamp the

board and flip it over as shown to expose the holes

6. Screw in the wood

screws as shown.

7. Repeat for the other

side.