Product Manual

BUNK ASSEMBLY

(Group 7)

In this step we will go over

generic bunk mounting. For your

craft the width, spacing, height

and angle of the bunks will be unique to

best support your hull for trailering over the road.

Included with your trailer are 4 short and 4 long brackets shown above. Use 4, the other 4 will be left

over. Choose the length brackets that best hold your craft as low as possible over the frame without

risk of bumping it or the fenders. Unnecessary height only makes the craft more difficult to get on

and off the trailer.

1. Study the example bunk setup photos (appendix A) and choose the photo most similar to your

craft. Note which bracket lengths are used and about where the brackets are clamped onto the

frame cross members and how high they are mounted in their adjustment slots. With an idea of

what will work for your craft in mind, now we can begin.

2. After choosing which length brackets

to use, attach the swivel brackets to

each as shown using 7/16” x 1” bolts

and nuts. Tighten just snug as you

will want to be able to swivel the

brackets when screwing the bunk

boards on later.