Product Manual

12
4. Fit the U-bolts under the axle and up thru the tie plate as shown. Note the spring centering bolt
fits into the center hole of the tie plate.
5. Tighten each nut a couple turns each evenly drawing the axle up to the spring. As the assembly
closes, guide the spring centering bolt into the spring centering hole in the axle. DO NOT
FULLY TIGHTEN THE NUTS at this time. They will be tightened after the axle spring assembly
has been mounted to the frame.
6. Repeat assembly
process for the second
spring. Make sure the
springs are turned the
same way.
7. Carry the axle/spring
assembly to the trailer
frame and slide the
slipper spring ends into
the slipper spring
brackets as shown.