Instructions Owner's manual

II0145A
Page 1 of 1
N7196 Printed Circuit Board on
N1611 Anti-Drive End Housing
Replacement Notice
When replacing the lower printed circuit board N7196,
label wires when disconnecting.
Be sure to re-attach field wiring to the standoffs
on the circuit board as shown below.
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline [phone]
F– field connection standoff
F+ field connection standoff
F+ field black wiring
F– field white wiring