Installation User guide

II0046APage 1 of 2
Installation Instructions
C. E. Niehoff & Co
.
BRUSHLESS ALTERNATORS
Make alternator connections as shown
on this page.
See page 2 for
regulator connections.
Figure 1- Alternator (shown with regulator)
Terminal on
Vehicle “B+” lead
➛
Washer
Lockwasher
➛
Nut, .3750-16;
torque to
1.69 Nm / 15 lb.in.
➛
Figure 1a - Positive Terminal Connections
➛
Positive Terminal on alternator
➛
➛
Washer
Lockwasher
➛
Nut, .3125-18 UNC-2A;
torque to 1.13 Nm / 10 lb.in.
➛
➛
Ground Terminal
on alternator
Terminal on
vehicle ground lead
➛
Figure 1b - Ground Terminal Connections
➛
➛
Fuselink
➛
Insulator
➛
Washer
N1211, N1211-2, N1211-4, N1211-5 Alternators
with N3106 Regulator (N1211-2)
or N3116 Regulator (N1211-4)
or N3121 Regulator (N1211-5)