TG Combo Guide Instruction Manual

Page 5

SM40A

Installation Instructions (CONT’D)

ALTERNATOR CHARACTERISTICS FOR 14 VOLTS/ 70 AMP:

APPLICABLE MODELS: C131

OUTPUT CURVE: OUTPUT AMPERES VERSUS ALTERNATOR SHAFT SPEED IN RPM AT 13.8

VOLTS.

TORQUE CURVE: DRIVE TORQUE IN Nm VERSUS ALTERNATOR SHAFT SPEED IN RPM

REQUIRED TO PRODUCE OUTPUT CURVE.

ALL MEASURMENTS DEPICTED ON PERFORMANCE CURVES ARE TAKEN AT 104°F (40°C)

AMBIENT TEMPERATURE (UNLESS OTHERWISE SPECIFIED) AND A STABILIZED MACHINE

TEMPERATURE AT MAXIMUM OUTPUT WITH VOLTAGE CONSTANT AS SPECIFIED.

ABBREVATIONS:

RPM REVOLUTIONS PER MINUTE

Nm NEWTON-METER

Conversion: 1 Nm = 8.85 Pound Inch (LBIN)