Brochure

C&D Valve | Product Catalog | sales@cdvalve.com | 800.654.9233

CAP TUBES

OIL TAP

CAP TUBE

CORE CONTAINER | WRENCH

CORE CHASER | WRENCH

PART# CD1808 PKG QTY: 1

The oil tap is installed on a semi-hermetic compressor for the changing of oil and

testing procedures. The internal pressure helps discharge the oil from the crankcase

and acid tests can be made while the compressor is running. It allows the addition

by vacuum or removal by pressure of oil while compressor is running. Detect

hazardous refrigerant pooling in the crankcase before start-up and control the

removal using a compound gauge. The oil tap can be permanently installed.

PART# CD2540 PKG QTY: 1

Factory made double ﬂare

connection, used in such ways

as an external equalizer tube on

an expansion valve, 36” of copper

tube with double ﬂares on swivel

on each end, and no depressor tips

PART# CD2541 PKG QTY: 1

Same as CD2540, with a depressor tip

on one end

PART# CD2542 PKG QTY: 1

Same as CD2540, with a depressor tip

on each end

PART# CD3813 PKG QTY: 1

Core container with wrench, all brass with knurl

for easy handling, compact design holds three

valve cores

PART# CD3805 PKG QTY: 10

Plastic tube container with six valve cores

and one core wrench tool—only available

in a display box of 10

PART# CD3800 PKG QTY: 1

Two (2) tools - a core wrench and thread

chaser, comes with six (6) cores and

overall length is 3-1/2”

TECH TIP

Always install a new valve core

when nished servicing

a system. Installing

a new valve core is

your best method

in preventing access

tting leaks.