User Manual

Edition 09/2000
6
Available user number
Present the badge in front the control unit proximity reader to program the badge on door 1 and /or door 2. To
program the RF Transmitter, press on one of the remote button.
if the badge is already programmed; this message is displayed during 2 seconds.
Present another badge.
Once the badge is saved, the user number s stays displayed during 2 seconds. According the door selected
before programming the badges, a dot will appear next to the digit number of the user number. The next user
number available is displayed.
User number occupied
Deleting a badge
Select the user number and press twice on the Ent button.
Conservation du code d’Entée et modification de l’affectation des portes
Validez pour conserver le code d’Entée existant. Il est alors possible de reprendre la procédure d’affectation
des portes en (A). L’affichage est celui d’un rang occupé.
Cette affectation est temporaire et valable uniquement pour ce rang occupé.
L’affectation des portes avec laquelle a débuté la programmation est toujours utilisable pour la suite des
enregistrements.
To exit from programming mode press on PROG button.
Open Time Relay (Menu 2)
The first time relay indicates a default value of 1 second for relay 1.
Press Ent button to change the open time for relay 1 and enter a time from 01 second to 99 seconds. Enter 00
for a latched output time. Then press Ent button to save the new time.
Press Nxt or Prv to select another door time relay and press Ent button to modify the time.
The second time relay indicates a default value of 1 second for relay 2.