User Manual

RS02109/0814/CD 2 www.cdtechno.com
SAFETY PRECAUTIONS
Only authorized and trained personnel familiar with batter y installation, preparation, charging, and
maintenance should be permitted access to the battery.
WARNING
NOTE
This manual is to be used for the ins tallation and operating of C&D’s Liberty MSE or Liberty DCS series of batteries.
SHOCK HAZARD Do not touch un-in sulated battery, co nnectors or ter minals. Be sur e
to discharge static electricity from tools and technician by touching a grounded surface
near the batteries, but away from the cells and flame arresters.
All tools should be adequate l y insulated to avoid the possibility of shorting c onnections.
Do not lay tools on the top of the battery.
Although VRLA batteries are sealed and emit no gas during normal operation, they
contain potentially explosive gases, which may be released under abnormal operating
conditions, such as a charger malfunction. It is the responsibility of the customer to
provide adequate ventilation so hydrogen gas accumulation in the battery area does
not exceed two percent by volume. However, normal air circulation in a ventilated
facility will preclude any hydrogen build-up even during equalize charging. Never
install batteries in a sealed cabinet or enclosure. If you have any questions, contact your
local C&D representative.
This battery contains sulfuric acid, which can cause severe burns. In case of skin contact
with electrol y t e, remo ve contaminated clothing a nd flush af fected areas thoro ughly wit h
water. I f eye co nt ac t has occ ur r ed, flush for a m inimum of 15 min utes wit h large am ounts
of running water and seek immediate medical attention.
Warning
Risk of fire, explosion or burns. Do not disassemble, heat above 80ºC (175ºF) o r incinerate
MPORTANT
FOR ADDITIONAL INFORMATION CONTACT:
C&D Technologies, Inc.
Technical Service Department
1400 Union Meeting Road
P.O. Box 3053
Blue Bell, PA 19422-0858
Telephone 1-800-543-8630 +1 (215)619-2700 FAX 215-619-7899
customersvc@cdtechno.com
Check C&D’s web site f or further details www.cdtechno.com