User Manual

DETAIL #1 Brace to Frame Connection.
DETAIL #2 Rail to Frame Connection.
DETAIL #3 Brace to Brace Connection.
Typical Bolted Connections: These typical details are to be used unless detailed specifically on drawing.
Use torque values from Table #2. For all values.
CONNECTION DETAILS FOR RACK ASSEMBLY.
Nut, 1/2-13
Frame Upright
Brace
Lock Washer, 1/2
Bolt, 1/2-13 x 1.50
Frame, Typical for
Both Side Restraint
and Bottom Rails
Serrated Nut
Strut, For Support
Rails or Side Rails
Lock Washer, 3/8
Bolt, 3/8-16 x 1.00
Bolt, 3/8-16 x 1.00
Note: Bolt head must
be facing Battery
3/8 Lock washer
Brace
Brace
Nut, 3/8-16
DETAIL #4
Typical Bolted Connections Cont
CONNECTION DETAILS FOR
Bracket
Tie Rod and Poly Tubing
Corner Bracket
3/8-16 x 1.00 Bolt
and 3/8 Lock Washer
Serrated Strut Nut
DETAIL #5
1400 Union Meeting Road
P.O. Box 3053 • Blue Bell,
[phone] • Fax (215)
[e-mail]
www.cdtechno.com
RSO1942 2/18/03 4:04 PM Page 1