Troubleshooting guide

Setting the Clock and Day
1) Press and hold the CLOCK Button while settihg the time.
2) While holding the CLOCK Button, press the DAY Button and select
the corresponding day as shown on the display.
3) While holding the CLOCK Button, press the HOUR Button until the
Appropriate hour and AM/PM is indicated on the display.
4) While holding the CLOCK Button down, press the MIN Button and
Select the appropriate minute setting. Each time you press the MIN
Button the seconds reset to "0" .
VersaCorder Page 7
HOUR
CLOCK
DAY
MIN
DAY Settings
AM/PM
Indicator
Current
Time
Seconds
Counter